gothic Archives -

How to Crochet Modified Gothic Crochet Stitch

How to Crochet the Modified Gothic Crochet Stitch

by strommercrafts / March 30, 2024

Hey everyone, today I’m sharing how to crochet the Modified Gothic Crochet Stitch and how you can tailor it to fit your own crochet pattern!

I absolutely love this crochet stitch, it gives your fabric the appearance of lacy diamonds, which is great for gothic crochet patterns.

The original Gothic Crochet Stitch was created by astra.lebedeva2019, who can be found on Instagram. I became very inspired to crochet some sort of lacy crochet pattern with this stitch. However, I discovered what I wanted to use it for…well it just didn’t quite work the way I wanted it to!

I needed the diamond stitches to be thicker and more chains in between the diamonds. This was to give a more lacy look to my particular project, hence the Modified Gothic Crochet Stitch was born.

Please note that some of these links may be affiliate links. That means that if you click on these links and make a purchase, I may receive a commission at no extra cost to you. You can find more information about our disclosure policy here. Thank you for your support.

For this crochet stitch pattern, I’m using crochet thread from Hobby Lobby’s Artiste line, specifically in Orchid. The black yarn pictured is Rainbow Cotton from Hobbii.

I think the black yarn works better for a gothic crochet pattern (for obvious reasons), but it can be pretty difficult to see the stitches in the following tutorial. So, I’ve opted for a lighter color (the Orchid) in order for you to be able to actually see.

Of course, you can use any yarn or hook size that you like, I just really like to crochet lace, so I’m using crochet thread with a 1.65mm crochet hook.

What is the Modified Gothic Crochet Stitch best used for?

I personally crocheted a Gothic Crochet Table Runner with this stitch, which I think looks pretty great (although I’m obviously biased)!

This stitch would be a good choice to use on scarves, shawls, light weight blankets, veils, market bags…really anything that you can think of that would be great for lace crochet stitches!

What is the repeat formula for the Modified Gothic Crochet Stitch?

The repeat formula for this crochet stitch is 12+6. This means that you will chain a multiple of 12 chains and then add 6 more chains for the turning chain.

For example: 12 x 3 = 36 chains, then + 6 more chains for the turning chain to = 42 chains.

The turning chain in this pattern counts as a treble crochet and a chain 2.

What if I want to make a foundation row of single crochets, half double crochets, double crochets, etc.?

Go for it! The following instructions for the Modified Gothic Crochet Stitch work into the chains of your foundation row, however some crocheters may want a foundation row with stitches in it already.

In order to make a foundation row of single crochets, half double crochets, double crochets, treble crochets or whatever tickles your fancy, you’ll need to make sure that the total amount of stitches in that foundation row is a multiple of 12.

It’s also up to you if you want to count your turning chain or not. If you want to count it…just remember to keep your total stitch count to a multiple of 12.

Materials Used:

1.65mm Crochet Hook (or a hook of your choice)
Hobby Lobby Artiste Crochet Thread in Orchid (or a yarn of your choice)
Scissors
Tapestry Needle

Abbreviations Used:

YO – yarn over
Ch(s) – chain(s)
St(s) – stitch(es)
Dc – double crochet
Trc – treble crochet

Modified Gothic Crochet Stitch Pattern:

For this swatch, I am going to ch a total of 54 (12 x 4 = 48, + 6 for the turning chain)

Row 1: *YO twice, insert into 9th ch from hook, pull up a loop, YO and pull through 2 loops (3 loops on your hook).

Skip a ch, YO insert your hook into next ch, pull up a loop, YO and pull through 2 loops (4 loops on your hook).

YO, skip a ch, insert your hook into next ch, pull up a loop, YO and pull through 2 loops (5 loops on your hook).

YO, skip a ch, insert your hook into next ch, pull up a loop, YO and pull through 2 loops (6 loops on your hook).

YO, pull through 4 loops, YO and pull through 2 loops, YO and pull through 2 loops again. This is your triangle decrease stitch.

Ch 2, skip 2 chs, trc into next ch, ch 1, dc into the first two “loops” in the leg of the trc you just crocheted (see pic below for placement).

Ch 1, dc into same space, ch 1, dc into same space again, ch 1, dc one more time into the same space (you should have 4 posts separated by 3 ch 1s). This is your triangle increase stitch.

Ch 2, skip 2 chs*, repeat from *to* trc into the last ch.

Row 2: Ch 6 (counts as a trc and ch 2), turn, for this row, we will be making triangle decrease stitches on top of the previous row’s triangle increase stitches and vice versa.

The last stitch from row 1 should have been a triangle decrease stitch, so for row 2, we will begin with a triangle increase stitch.

If your row 1 ended with a triangle increase, skip to row 3!

Skip the next ch 2 space, make a trc, but place it under the next stitch (not into it as you normally would). I find it helpful to think of this space as the “neck” of the last row’s triangle decrease stitch. Just find a space to insert your hook into the neck and trc there. If you trc into the stitch normally, the diamonds we are trying to create will look off-center (see pic below for placement).

Triangle increase stitch as you did in row 1 (ch 1, dc in the front 2 loops of the trc, ch 1, dc again in the same space).

Ch 2, now we will make a triangle decrease into the next triangle increase.

Make a triangle decrease stitch as we did in row 1, using only the dcs and trc sts and skipping the ch 1 spaces between.

If crocheted correctly, this will give us our first diamond shape.

Ch 2 and repeat these two stitches with a ch 2 between each triangle increase and decrease.

After the last ch 2, ( you should have 3 chs left), finish your row by skipping 2 chs and trc into the last ch.

Row 3: Ch 6 (counts as a trc and ch 2), turn, the first st below should be a triangle increase stitch, so we will begin with a triangle decrease stitch. Make a decrease stitch as you did in row 1, but use the tr and dcs, while skipping the ch 1’s between. Ch 2, and triangle increase into the next triangle decrease like we did in row 2 (trc into the “neck” of the decrease stitch below, not the actual st).

There is no difference in this row compared to row 2, other than starting with a different triangle stitch.

Repeat rows 2-3

And there you have it! That is the Modified Gothic Crochet Stitch!

Thank you and I’ll see you next time.

Gothic Crochet Table Runner Pattern

by strommercrafts / November 10, 2023

Hello everyone, today I’m excited to present my latest crochet pattern, the “Gothic Crochet Table Runner.”

If you’re looking to add a bit of gothic decor to your home, you’ll absolutely love this pattern! The black yarn and the lacy design will transform your dining or coffee table into a statement piece, plus you can tell all your guests you made it yourself! Talk about impressive.

The center of the table runner was inspired by the Gothic Crochet Stitch by astra.lebedeva2019 on Instagram. I loved the way these diamonds are created in that pattern, however for the tiny crochet thread we will be using, I wanted to make the diamonds look more lacy and a little thicker.

This is a beautiful crochet table runner pattern, created with black crochet thread, however, it is another crochet pattern that takes time to complete and it is designed with crocheter’s who have an intermediate to advanced skill set.

I didn’t time myself, and I’m a busy mom of little kids, so you’ll probably get it finished faster than me! If I had to guess, this probably took me a month to finish, of inconsistently crocheting 1-2 hours every day. Your time may vary obviously!

I’ve adjusted the pattern instructions to allow you to make your table runner as long as you want. I don’t recommend making the short side longer than what I’ve described below, I think it makes the table runner look too wide on that side.

But seriously, look at how pretty this thing is!

Now as a reminder, I try my best to make pattern instructions accurate, but I AM just a mom who likes to crochet, so please let me know if you see any errors by commenting below.

With all that, let’s get started on this Gothic Crochet Table Runner Pattern!

Please note that some of these links are affiliate links. That means that if you click on these links and make a purchase, I may receive a commission at no extra cost to you. You can find more information about our disclosure policy here. Thank you for your support.

Materials Needed:

1.65 mm Crochet Hook
Red Heart Classic Black Crochet Thread, Size 10, 300 Yards x 3 (or more as needed)
Stitch Markers (optional but highly encouraged)
Scissors
Tapestry Needle
Pins (optional)
Blocking Boards (optional)

Abbreviations Used:

St(s) – stitch(es)
Ch(s) – chain(s)
Sl st – slip stitch
Sc – single crochet
Dc – double crochet
Fpdc – front post double crochet
Trc – treble crochet

Special Stitches:

Puff Stitch – YO (yarn over), insert hook into designated st/space, pull up a loop x 5 times (11 loops on your hook), YO, pull through all but the last loop (2 loops on your hook), YO, pull through last 2 loops.

Triangle Increase/Decrease – I will discuss these two stitches in detail below. Essentially, this is a group of trcs/dcs that create the top or bottom part of our diamonds.

Special Instructions:

I do not have st counts at the end of the rows. This is to allow you freedom to make your table runner as long or short as you’d like.
Instructions in () are grouped this way to make it easier to read and is usually written this way to indicate a series of sts made in the same st.
There is a bit of math we will have to do later, but don’t worry, I will walk you through it as we get to those spots in the pattern.

Gothic Crochet Table Runner Pattern

Ch 53

Row 1: *YO twice, insert into 8th ch from hook, pull up a loop, YO and pull through 2 loops (3 loops on your hook), skip a ch.

YO insert your hook into next ch, pull up a loop, YO and pull through 2 loops (4 loops on your hook), skip a ch.

YO insert your hook into next ch, pull up a loop, YO and pull through 2 loops (5 loops on your hook), skip a ch.

YO insert your hook into next ch, pull up a loop, YO and pull through 2 loops (6 loops on your hook).

YO, pull through 4 loops, YO and pull through 2 loops, YO and pull through 2 loops again. This is your triangle decrease stitch.

Ch 2, skip 2 chs, trc into next ch, ch 1, dc into the first two “loops” in the leg of the trc you just crocheted (see pic below), ch 1, dc into same space, ch 1, dc into same space again. This is your triangle increase stitch.

Ch 2, skip 2 chs*, repeat from *to* trc into the last ch (4 triangle decreases and 3 triangle increases)

Row 2: Ch 6 (counts as a trc and ch 2), turn, for this row, we will be making triangle decrease stitches on top of the previous row’s triangle increase stitches and vice versa.

The last stitch from row 1 should have been a triangle decrease stitch, so for row 2, we will begin with a triangle increase stitch.

Triangle increase stitch as you did in row 1. Ch 2, now we will make a triangle decrease into the next triangle increase. Make a triangle decrease stitch as we did in row 1, using only the dcs and trc sts and skipping the ch 1 spaces between.

If crocheted correctly, this will give us our first diamond shape.

Ch 2 and repeat these two stitches with a ch 2 between each triangle increase and decrease After the last ch 2, finish your row by skipping 2 chs and trc into the next ch.

Row 3: Ch 6, turn, the first st below should be a triangle increase stitch, so we will begin with a triangle decrease stitch. ch 2, and triangle increase into the next triangle decrease like we did in row 2. There is no difference in this row compared to row 2, other than starting with a different triangle stitch.

Repeat Rows 2-3 until you reach 62 rows or increase the length with a repeat of 12 rows, do not cut yarn.

Border:

Now we will be creating the border around our length of lacy diamonds. We need to do a few simple rows of sc around to create a nice, thick line, a few rows of mesh squares, and then we’ll finish with an intricate pattern consisting of a variety of stitches.

***Important note on length adjustments***

The last row of our scs border needs to follow a repeat of 27+24 sc (do not count the corner sts). We will be doing 3 rows total of sc. For each row, the sc will increase by two.

So, for example, on the short side of our rectangle, we need to have a total of 47 sc on the first row. This will increase to 49 sc on the next row, and then to 51 sc on the last row. 27+24 = 51 sc.

This is where stitch markers come in handy on the long side to help you count. Just make a series of 27 sc and make sure that you can fit 24 more on the very last row of sc (row 3).

It seems like a lot, but this is the only way your beautiful border is going to fit. Avoid the headache later by getting the math right early, because we both know that we don’t have the time or patience to frog everything :).

Row 1: Ch 1 (does not count as a st), sc into the same st, ch 1 (place a stitch marker here to help identify the corners later, otherwise just pray you can find it later lol), sc again into the same st. Now turning down the side, we will be placing a series of 3 sc into the sides of either the turning chs or the trcs from the previous rows.

The last sc you made counts as part of that series of 3, so place 2 more sc into the side of the trc. See pic for a better visual below.

You will have to skip a ch when you reach the starting chs, and that is ok.

When you get close to the next corner, I found it easier to count 2 chs away from the triangle increase/decrease from the starting row and placing my corner st of (sc, ch 1, place a stitch marker, sc) into the next ch away.

Now going down the next side (this should be the underside of our starting ch), place 1 sc into each ch 2 space, 1 sc into each of the bottoms of the 4 trc that make up the triangle decrease, 1 sc into each ch 2 space, and then 1 sc into the bottom of the triangle increase. Continue this way until you reach the next corner (the 3rd ch after you make 2 sc in the last ch 2 space) and (sc, ch 1, place a stitch marker, sc) in the same ch.

***Make sure you have the same number of sts on each side***

Continue making sc around the next side and creating another corner st of (sc, ch 1, sc).

Once you get back to the top of your work, sc into each st, but skip the ch 1s in the triangle increase stitches (it looks too wavy if you do).

Sl st to first sc.

Row 2: Ch 1 (does not count as a st), sc in same st, (sc, ch 1, place st marker, sc) into next ch 1 space, then make 1 sc in each st across (try not to skip the st right after you finish your corner st, sometimes it gets a little hidden). Continue making sc and your corners in this fashion. Sl st to first sc.

Row 3: Ch 1 (does not count as a st), sc in same st, sc in next st, make a corner st in the next ch 1 space (sc, ch 1, sc). Continue making sc and corner sts as you did in row 2. Sl st to first sc.

***Take the time here to double check your st counts , remember, your last row needs to have a repeat of 27+24 not including the ch 1 corners. If you need to, it’s ok to add or skip scs to achieve the repeat formula.***

Now we will be making our mesh square rows.

Row 4: Sl st into next few sts until you reach the corner ch 1 space, sl st into the ch 1 space, ch 8 (counts as dc and ch 5), dc in same space, *ch 2, skip 2 sts, dc in next st* repeat from *to* all the way around. (dc, ch 5, dc) in the next ch 1 corner spaces. Sl st to top of 3rd ch of our starting ch 8.

***For my short side, I have 13 mesh squares and on my long side I have 58 mesh squares (not including the ch 5 corners) Your long side number may be different if you increased or decreased the length.***

Row 5: Ch 5, (counts as dc and ch 2), (dc, ch 5, dc) in next ch 5 corner space. *Ch 2, dc in next dc.* Repeat from *to* around, making (dc, ch 5, dc) in the ch 5 corner spaces. Sl st to 3rd st of starting ch 5.

Row 6: Ch 5, dc in next dc, ch 2, (dc, ch 5, dc), *ch 2, dc in next dc.* Repeat from *to* around, making (dc, ch 5, dc) in the ch 5 corner spaces. Sl st to 3rd st of starting ch 5.

***Go ahead and stop again, let’s count our mesh squares. Our last row of mesh squares needs to follow a repeat formula of 9+8 squares, not including the corners. I have 17 squares on my short side and 62 squares on my long side. Your border will not fit if we don’t follow this formula.***

Row 7: Sl st in each ch and st until you reach the first corner and sl st into the ch 5 space.

(Ch 3, 2 dc, ch 5, 3 dc, ch 5, 3 dc) in same ch 5 space. Ch 4, *skip over next dc and ch 2, skip over next dc and ch 2 again, sc into next dc (should be the 3rd dc away from the corner space), [skip ch 2 space, (3 dc, ch 1, 3 dc) in next dc, skip ch 2 space, sc in next dc] x 2 times, ch 4, skip the next 2 mesh squares, in the next square, (3 dc, ch 5, 3 dc), ch 4.*

Repeat from *to* until you reach the next corner space, skip over last two mesh squares, (3 dc, ch 5, 3 dc, ch 5, 3dc) in the same ch 5 corner space. Continue this way until you reach the beginning ch, sl st into top of starting ch 3.

Row 8: Ch 3, (fpdc around next dc, dc in next dc, ch 4, sc in ch 5 space, ch 4, dc in next dc, fpdc around next dc, dc in next dc, ch 4, sc in ch 5 space, ch 4, dc in next dc, fpdc around next dc, dc in next dc), ch 4, skip ch 4 and next 3 dc,

*sc in ch 1 space, skip 3 dc, and place (3 dc, ch 2, 3 dc) in the next sc (between the two shells), skip 3 dc and sc in ch 1 space, ch 4, skip 3 dc and ch 4, (dc in first dc, fpdc in next dc, dc in last dc, ch 4, sc in ch 5 space, ch 4, dc in next dc, fpdc around middle dc, and dc around last dc), ch 4.*

Repeat from *to* until next corner space and (dc, fpdc around next dc, dc in next dc, ch 4, sc in ch 5 space, ch 4, dc in next dc, fpdc around next dc, dc in next dc, ch 4, sc in ch 5 space, ch 4, dc in next dc, fpdc around next dc, dc in next dc) in the corner. Continue this way until you reach the beginning ch, sl st into top of starting ch 3.

Row 9: Ch 3 (fpdc around fpdc, dc in next dc, ch 4, 2 sc in ch 4, sc in next sc, 2 sc in ch 4 space, ch 4, dc in next dc, fpdc around fpdc, dc in next dc, ch 4, sc in next sc, 2 sc in ch 4 space, ch 4, dc in next dc, fpdc around fpdc, dc in next dc), ch 5,

*skip to ch 2 space, (2 sc, ch 4, sc, ch 4, sc, ch 4, 2 sc) in ch 2 space, ch 5, skip 3 dc, skip sc and skip ch 4, dc in next dc, fpdc around fpdc, dc in next dc, ch 4, 2 sc in ch 4 space, sc in next sc, 2 sc in next ch 4 space, ch 4, dc in next dc, fpdc around fpdc, dc in next dc, ch 5.*

Repeat from *to* until you reach the corners, (dc in next dc, fpdc around fpdc, dc in next dc, ch 4, 2 sc in ch 4, sc in next sc, 2 sc in ch 4 space, ch 4, dc in next dc, fpdc around fpdc, dc in next dc, ch 4, sc in next sc, 2 sc in ch 4 space, ch 4, dc in next dc, fpdc around fpdc, dc in next dc), ch 5, skip to ch 2 space, (2 sc, ch 4, sc, ch 4, sc, ch 4, 2 sc) in corner spaces.

Continue this way until you reach beginning ch 3. Sl st to top of ch 3.

Row 10: Ch 3, (fpdc around fpdc, dc in next dc, *ch 5, skip ch 4, skip 2 sc, [2 sc, ch 4, sc, ch 4, sc, ch 4, 2 sc] in next sc, ch 5*, dc in the 4th ch away in next ch 4, dc in next dc, dc in fpdc, ch 5, dc in same st, dc in next fpdc, dc in 1st ch in next 4 ch.

Repeat from *to,* dc in next dc, fpdc in fpdc, dc in next dc), ch 6,

**skip ch 5, skip first ch 4 “loop,” sc in middle ch 4 “loop,” ch 6, dc in next dc, fpdc around fpdc, dc in next dc, ch 5, skip ch 4, skip 2 sc, [2 sc, ch 4, sc, ch 4, sc, ch 4, 2 sc] in next sc, ch 5, fpdc around fpdc, dc in next dc, ch 6.**

Repeat from **to** until corner spaces, (dc in next dc, fpdc around fpdc, dc in next dc, *ch 5, skip ch 4, skip 2 sc, [2 sc, ch 4, sc, ch 4, sc, ch 4, 2 sc] in next sc, ch 5*, dc in the 4th ch away in next ch 4, dc in next dc, dc in fpdc, ch 5, dc in same st, dc in next fpdc, dc in 1st ch in next 4 ch.

Repeat from *to,* dc in next dc, fpdc in fpdc, dc in next dc) in corner spaces. Continue this way until you reach the beginning, sl st to top of starting ch 3.

Row 11: Ch 3, (fpdc around fpdc, dc in next dc, *ch 11, skip over ch 5, skip the set of ch 4 loops, skip next ch 5, and dc in next dc, fpdc around next dc, dc in next dc*, ch 5, puff st in next ch 5 space, ch 5, puff st in same space, ch 5, dc in next dc, fpdc around next dc, dc in next dc. Repeat from *to* once more.)

**Ch 4, puff st in 6th ch in next ch 6, ch 3, skip next sc, puff st in 1st ch of next ch 6, ch 4, dc in next dc, fpdc around fpdc, dc in next dc**, repeat from *to* once more, repeat from **to.**

Continue this way until next corner space, ch 4, dc in next dc and repeat instructions in () for the next corner. Sl st to top of beginning ch 3.

Row 12: Ch 3, (fpdc around fpdc, dc in next dc, ch 4, 2 dc in 5th ch away, 2 dc in next ch, 2 dc in next ch, ch 4, skip next 3 dc, skip 1st ch 5 space, puff st in next ch 5 space, ch 3, puff st in same space, ch 3, puff st in same space again, ch 4, skip next ch 5, skip next 3 dc, 2 dc in 5th ch, 2 dc in next ch, 2 dc in next ch, ch 4, dc in next dc, fpdc around fpdc, dc in next dc),

*ch 4, puff st in ch 3 space, ch 3, puff st in same st, ch 4, dc in next dc, fpdc around fpdc, dc in next dc, ch 4, 2 dc in 5th ch away, 2 dc in next ch, 2 dc in next ch, ch 4, dc in next dc, fpdc around fpdc, dc in next dc.*

Repeat from *to* until next corner space, dc in next dc, repeat instructions in () for corners. Continue this way until beginning and sl st into top of starting ch 3.

Row 13: Sl st into next 2 dc, sl st into next 4 chs, sl st into dc, [ch 3, dc in next 2 dc, ch 9, dc in next 3 dc, ch 4, skip ch 4, puff st into next ch 3 space, ch 3, puff st in same space, ch 9, (puff st, ch 3, puff st) in next ch 3 space, ch 4, dc in next 3 dc, ch 9, dc in next 3 dc],

ch 4, *skip ch 4, skip next 3 dc, (puff st, ch 3, puff st) in ch 3 space, ch 4, skip ch 4, skip 3 dc, dc in next 3 dc, ch 9, dc in next 3 dc, ch 4.*

Repeat from *to* until corner spaces, (puff st, ch 3, puff st), in ch 3 space, ch 4, dc in next dc, repeat instructions in [ ] for corners. Continue this way until beginning and sl st into starting ch 3.

Row 14: Sl st into next 2 dc, sl st into ch 9 space, ch 3, **(ch 1, dc x 8 times [you should have 9 dc]), ch 2, skip 3 dc and sc into ch 4 space, ch 5, (puff st, ch 3, puff st) into next ch 3 space, (ch 3, puff st x 3 times [3 puff sts total]) in ch 9 space, ch 3, (puff st, ch 3, puff st) in ch 3 space, ch 5,**

*sc into ch 4 space, ch 2, skip 3 dc, (dc, ch 1 x 8 times) in ch 9 space, 1 more dc into same ch 9 space, ch 2, skip 3 dc, sc into ch 4 space, ch 5 (puff st, ch 3, puff st) into ch 3 space, ch 5.*

Repeat from *to* until the next corner, skip 3 dc, dc into ch 9 space, repeat from **to** for corners. Sl st into 3rd ch of starting ch 4.

Row 15: Ch 7 (counts as trc and ch 3), 2 dc into 4th ch away from hook, **(trc into next dc, ch 3, 2 dc into trc just made x3 times), trc into next dc, ch 3, 2 dc into trc just made, ch 3, sl st into same trc, ch 3, 2 dc into same trc again, (trc into next dc, ch 3, 2 dc into trc just made x 3 times), trc in last dc, (you should have 9 trc and 9 “tags”) ch 2**

Skip ch 2, skip ch 5, *(puff st, ch 5, 2 dc into 4th ch away from hook, ch 3, sl st into same ch, ch 1, puff st) into next ch 3 space, (ch 5, 2 dc into 4th ch away from hook, ch 3, sl st into same ch, ch 1)*

Skip next ch 3 space, repeat from *to* twice more, skip next ch 3 space (puff st, ch 5, 2 dc into 4th ch away from hook, ch 3, sl st into same ch, ch 1, puff st) in next ch 3 space. (You should have a total of 8 puff sts and 7 “tags” between the puff sts), ch 2, skip ch 5 space skip ch 2 space, trc into first dc, ch 3, 2 dc into trc just made,

Repeat from **to,** skip ch 2, skip ch 5, (puff st, ch 5, 2 dc into 4th ch away from hook, ch 3, sl st into same ch, ch 1, puff st) in next ch 3 space, ch 2, skip ch 5, skip ch 2, trc in first dc, repeat from **to** again.

Continue this way around until next corner, ch 2, trc into first dc and repeat from beginning for the corners. Sl st to 4th ch in starting ch 7.

Cut yarn with scissors, weave in any ends with tapestry needle.

CONGRATULATIONS!! You made it!!

Blocking:

To block your gothic crochet table runner, soak it in a large bowl of water for 1-2 minutes. Gently squeeze out the excess water.

Now, you can be fancy and use puzzle blocking boards to help you pin your table runner in place. These are great because you can make them as long and wide as you want (great for long crochet projects).

Or you can place it on a large towel/layer a few towels together, then pin it through the towels.

Leave it to dry for at least 24 hours.

Thank you for checking out the Gothic Crochet Table Runner Pattern. I hope that yours turned out beautifully! If you have questions or if you find a mistake, please let me know in the comments below.

Until next time!

Gothic Crochet Pattern – Black Coasters!

by strommercrafts / August 22, 2023

Have you been looking for a gothic crochet pattern, but maybe can’t find a simple or practical one? Well fellow goth crocheters, you can rejoice! Today I have for you; a gothic crochet coaster pattern!

Do you like the gothic aesthetic? Maybe you simply love crocheting with black yarn? Or maybe you hate yourself enough to not only try crocheting with black yarn but…*gasp* TINY black yarn (I’m only kidding, but kinda not really ;)).

For this gothic crochet coaster pattern, I’m using Fashion Crochet Thread from Red Heart. I had a hard time deciding what sort of yarn to use for this pattern. I tried using some medium 4 black acrylic yarn, but it ended up being a little too fuzzy and thick for my liking (black cotton yarn probably would have been fine, I just didn’t have any!).

The normal crochet thread I use would have taken too long to make all the puff stitches, but this fashion thread is JUST the right thickness to make this coaster.

Skill Level Needed:

I’m just going to say that this black crochet coaster is for an intermediate skilled crochet or one that is willing to learn how to 1) crochet in the round and 2) learn how to crochet puff stitches.

I’ve used a magic circle to start this coaster, but you can also simply chain 2 and crochet into the first chain.

Puff Stitches: The Heart of the Design

The puff stitch is the star of this pattern. Why puff stitches? Well, it’s a dense stitch that provides the perfect thickness for a crochet coaster when paired with this type of thread.

You don’t want a totally thin coaster, because if you have any spillage from sipping your favorite beverage, you want your coaster to catch it and not seep through to the table or surface you’re trying to keep nice.

How to Crochet a Puff Stitch:

Don’t know how to make a puff stitch? No problem! Let’s discuss the short and detailed version of making this stitch.

Short: Yarn over (YO) and insert your hook into the next stitch and pull up a loop three times (7 loops on your hook) YO and pull through all 7 loops.
Detailed: Yarn over (YO), insert your hook into the next stitch, pull up a loop (3 loops on your hook). YO, insert your hook into the same stitch, pull up a loop, (5 loops on your hook). YO, insert your hook into the same stitch again, pull up a loop, (7 loops on your hook). YO one last time and pull through all 7 loops on your hook.

Try to stay consistent with how far you pull your loops up. You’ll want to pull them up high enough that you can get your hook through all loops. Too high and your puff stitch will be too loose, but if you do it too low, it’ll be too hard to pull your hook through.

With all of that in mind, let’s dive on into this lovely, gothic crochet coaster!

Size:

This coaster’s diameter is about 4.25”
Your size may vary depending on your tension.
If you use a different sized yarn or hook than I used, your final coaster may be smaller or bigger.

Materials Needed:

Red Heart Fashion Cotton Crochet Thread, Size 3, 125 yards x 1 ball (I was able to get three coasters out 1 ball)
3.5mm Crochet Hook
Scissors
Tapestry Needle
Stitch Markers (optional)

Abbreviations Used:

St(s) – stitch(es)
Sl st – slip stitch
Mc – magic circle
Ch – chain

Special Stitches:

Puff Stitch – Yarn over (YO), insert your hook into the next stitch, pull up a loop (3 loops on your hook). YO, insert your hook into the same stitch, pull up a loop, (5 loops on your hook). YO, insert your hook into the same stitch again, pull up a loop, (7 loops on your hook). YO one last time and pull through all 7 loops on your hook.

Special Instructions:

The first round is started with a magic circle, alternatively you can chain 2 and crochet into the first chain.
The starting chain 1’s at the beginning of each round does not count as a stitch.
Many patterns will have you chain 1 after you puff stitch to “close” it…we will not be doing this. You’ll go straight into the next puff stitch from the previous one.
The number in parenthesis at the end of the round indicates how many stitches you should have.

Gothic Crochet Coaster Pattern:

Round 1: 8 puff sts in mc, sl st to first puff st (8 sts)
Round 2: 2 puff sts in every st around, sl st to first st (16 sts)
- **Protip: Having a hard time seeing your stitches? Use a stitch marker after you make your first puff stitch in the round so you know where to join!**
Round 3: 2 puff sts in first st, *1 puff st in next st, 2 puff sts in next st.* Repeat from *to,* sl st to first st (24 sts)
Round 4: 2 puff sts in first st, *1 puff st in next 2 sts, 2 puff sts in next st.* Repeat from *to,* sl st to first st (32 sts)
Round 5: 2 puff sts in first st, *1 puff st in next 3 sts, 2 puff sts in next st.* Repeat from *to,* sl st to first st (40 sts)
Round 6: 2 puff sts in first st, *1 puff st in next 4 sts, 2 puff sts in next st.* Repeat from *to,* sl st to first st (48 sts)
Round 7: 2 puff sts in first st, *1 puff st in next 5 sts, 2 puff sts in next st.* Repeat from *to,* sl st to first st (56 sts)

Cut yarn with scissors, pull through, weave in end with tapestry needle.

And there you have it! Enjoy your simple, functional, AND gothic crochet masterpiece! As your coaster finds its place, I hope that it brings that little bit of darkness to your surroundings you’ve been looking for ;).

Until next time!